Skip to main content

Do I Need to permit traffic (whitelist) to any IP addresses? - Knowledgebase / FGX WAF - Foregenix Customer Support

Do I Need to permit traffic (whitelist) to any IP addresses?

Authors list

After the Foregenix Web Application Firewall (WAF) is setup you will see the majority, if not all the traffic of your customers coming from Foregenix owned IP addresses that are associated with the WAF. Not all these IP's may be active at one time however, the IP pool is owned by us and are associated with the upscaling of our WAF infrastructure. Therefore, please make sure that you have whitelisted the following IP address on your firewall.

The WAF supports websites based on three regions: Europe (servers based in Ireland), North America (servers based in Ohio) and Australia (servers based in Sydney). Other regions are not supported for now. You can whitelist all of the following IP addresses, but you only need to whitelist the ones for your region. 


Europe
United States
  • 52.31.227.241
  • 54.171.56.191
  • 54.171.125.80
  • 54.194.177.121
  • 52.50.116.204
  • 52.209.212.248
  • 54.76.150.35
  • 52.50.181.234

  • 18.189.226.139
  • 3.19.251.94
Australia

  • 54.79.161.4 
  • 54.79.68.27




For the FGX-Web Seal these are the IP address you will need to whitelist:

Outgoing traffic:

Incoming traffic:

  • 52.16.84.238
  • 54.77.226.20
  • 54.246.153.50 



CIDR IP Address List:


A text file with the IP addresses is at: https://portal.foregenix.com/binaries/foregenix-ipv4